Home / Christmas and Seasonal / Maple Leaf Tealight Holder Laser Cut File

PetalSmith3D 1,330 files

Maple Leaf Tealight Holder Laser Cut File

Layered wood file

Be the first to review

Original price was: $8.00.Current price is: $5.60.

Maple Leaf Tealight Holder Laser Cut File, 3D Wooden Puzzle SVG DXF, LED Candle Holder, Autumn Thanksgiving Table Decor, 3mm Plywood

Add the commercial licence — $5.00 Sell what you make from this file · What is included
  • Download straight after checkout
  • Test-cut before listing
  • Something wrong? We fix the file, free
Meet the designer
PetalSmith3D 1,330 files on MixiArt
Visit shop Message
Layerednumbered in stacking order
SVG, DXF, AI, PDFone file per layer
Alignment built inpin holes every layer
Numbered partsengraved on the back
Any sizeresized on request, free
Licence includedpersonal use
About this file

Maple Leaf Tealight Holder: a 3D laser cut maple leaf for 3 mm plywood. 42 ribs fanned round the stem slide onto 6 rings and build the stacked lobe edges and S-shaped strips of a puffy leaf. An LED tealight sits in a ring on top, clamped by 4 hook ribs, and the leaf stands on an oval base locked by 2 keys.

THIS IS A DIGITAL FILE. No physical item will be shipped.

  • WHAT YOU GET
  • – Laser cut files in DXF and SVG (plus PNG previews), cut lines only (no engraving)
  • – Two versions: NOMINAL and KERF-COMP 0.15 mm
  • – All sheets in one file, one file per 400 x 300 mm sheet, and every part as its own file (35 different parts, NOMINAL size)
  • – Assembly guide PDF in English, German and French
  • – READ ME FIRST page: which version to cut, layers, what to test-cut first
  • – Delivered as 3 zip files: all files preview, per sheet, per part
  • FINISHED SIZE
  • – 350 mm wide, 129 mm deep, 332 mm tall to the top of the tealight ring (13.8 x 5.1 x 13.1 in); the LED tealight stands about 8 mm above the rim
  • – 60 pieces (35 different parts). Slotted assembly with one glue joint in the base. About 650 g (1.4 lb).
  • MATERIAL
  • – 3 mm plywood. The slots are 3.02 mm: measure your board, boards thicker than 3.05 mm (many 1/8 in boards are 3.175 mm) will be too tight.
  • – 10 sheets of 400 x 300 mm (15.75 x 11.8 in). Sheet 10 holds only one rim ring (89 mm across), so an offcut is enough.
  • – Wood glue for one joint in the base. Optional: 4 felt pads under the base.
  • LASER MACHINE
  • – Working area needed: at least 390 x 290 mm (15.4 x 11.4 in). The largest pieces are ring H2 (322 x 78 mm) and the two leaf-plane ribs R21 and R42 (317 x 175 mm).
  • – Fits: xTool S1 (498 x 319 mm), xTool P2 / P2S (600 x 308 mm), about 400 x 400 mm open-frame diode lasers (xTool D1 Pro, Atomstack A5 / A10, Sculpfun S30, Ortur LM3, Creality Falcon2), CO2 4040 (400 x 400 mm), CO2 6040 (600 x 400 mm) and larger.
  • – Fits after re-arranging the pieces: xTool M1 (385 x 300 mm), Glowforge Basic / Plus / Pro (495 x 279 mm).
  • – Too small: K40 (about 300 x 200 mm), 300 x 300 mm machines.
  • – Do not scale the files: the slots are made for 3 mm wood.
  • LIGHT
  • – 1 LED tealight, 38 mm diameter (standard battery tealight, CR2032, body up to about 21 mm tall), not included. LED only, never a real candle.
  • – The tealight sits in a wooden pocket and lifts straight out to change it; nothing is taken apart.
  • NOTES
  • – Cut ring H3 and the two R13 ribs first and slide the ribs onto the ring: the half-lap joints must slide in by hand, firm but without force. Check that the top tab of a stem rib (R12) goes through the tealight seat TS.
  • – Every rib number is cut twice (identical front and back copy) except R21 and R42: lay the ribs out by number first.
  • – The 6 rings must be held at their heights while the first ribs go in: a helper or 6 small boxes do it (no jig is included).
  • – Keep the glue out of the key channels in the base.
What is in the download
  • PT94 laser cut files
Licence

Make it as many times as you like for yourself or as gifts. To sell finished pieces, add the commercial licence when you buy. The file itself may never be resold or shared.

Cut it with

Same material, same afternoon.

View all
New3D Star Tree Lantern SVG laser cut file

3D Star Tree Lantern SVG

Layered wood file · ApexLayer3D

Original price was: $8.00.Current price is: $5.60.

From people who cut it

Reviews

There are no reviews yet.

Be the first to review “Maple Leaf Tealight Holder Laser Cut File”

Your email address will not be published. Required fields are marked *

Why these files cut cleanly

Cut before it is sold

Every file goes on a real machine and gets built by hand before it goes online. If it does not fit together, it does not go up.

Layers numbered on the back

Each part carries its layer number engraved on the reverse, so a stack of forty pieces never turns into a guessing game.

Alignment built in

Two 4 mm pin holes run through every wood layer. Glass patterns come with registration marks that survive printing.

Resized for free

Tell us the finished width you need and we redraw the file to match. No extra charge, usually back the same day.

Questions makers ask

What software do I need to open these?

LightBurn, xTool Creative Space, Glowforge and LaserGRBL all read the SVG straight off. The DXF is there for older machine software, and the AI and CDR files are for anyone who wants to edit the drawing.

My machine bed is smaller than the finished piece. Now what?

Every file also ships with each layer as its own file, so you can cut them one at a time on a small bed. Tell us your bed size and we will nest the parts to fit it.

Can I use wood that is not 3 mm?

Yes for the flat layered pieces — thicker wood just makes a deeper stack. For slot-together builds like the tealight shades the thickness is structural, so ask us and we will adjust the joints.

Do the glass patterns come sized for copper foil or lead came?

Both. Each pattern has two versions: a foil version with hairline cut lines, and a came version with the heart width already allowed for.

Can I sell what I make from these?

Personal use is covered by the free licence. Selling finished pieces needs the commercial licence, which is a few dollars on any file and included in every collection.

What if the file does not work on my machine?

Write to us with the file name and what happened. We fix the file and send it back. We do not reply with a link to a tutorial.