Home / Christmas and Seasonal / Christmas Angel Pendant Lamp Laser Cut File

Free file

PetalSmith3D 1,330 files

Christmas Angel Pendant Lamp Laser Cut File

Layered wood file

Be the first to review

Free

Christmas Angel Pendant Lamp Laser Cut File, Angel with Feather Wings and Halo, 3D Wood Ceiling Light SVG DXF, Holiday Decor 3mm

Free files are for MixiArt Club members. By getting this file you create a free account and join our email list: one free file every Friday plus sale news. We email you a link to confirm your address and unlock the file. Unsubscribe anytime.

  • Download straight after checkout
  • Test-cut before listing
  • Something wrong? We fix the file, free
Meet the designer
PetalSmith3D 1,330 files on MixiArt
Visit shop Message
Layerednumbered in stacking order
SVG, DXF, AI, PDFone file per layer
Alignment built inpin holes every layer
Numbered partsengraved on the back
Any sizeresized on request, free
Licence includedpersonal use
About this file

Angel Glow Christmas pendant lamp: a 3D laser cut kit for 3 mm plywood. Six teardrop robe ribs with flame-shaped windows form the angel’s body, a wings plate with feather windows and a star stands in front, a halo ring sits above the head, and an LED globe bulb glows inside the robe.

THIS IS A DIGITAL FILE. No physical item will be shipped.

  • WHAT YOU GET
  • – Laser cut files in DXF and SVG, CUT (red) and ENGRAVE (blue) on separate layers
  • – Two versions: NOMINAL and KERF-COMP 0.15 mm
  • – Every part also as its own file (13 parts)
  • FINISHED SIZE
  • – 353 mm wingspan, 190 mm deep, 291 mm tall (13.9 x 7.5 x 11.5 in)
  • – 13 pieces, glue-free slot assembly, wood about 120 g (0.3 lb)
  • MATERIAL
  • – 3 mm plywood. The slots are 3.02 mm: measure your board, boards thicker than 3.05 mm (many 1/8 in boards are 3.175 mm) will be too tight.
  • – 2 sheets of 400 x 300 mm (15.75 x 11.8 in).
  • LASER MACHINE
  • – Working area needed: at least 385 x 300 mm (15.2 x 11.8 in). The largest piece is the wings plate (353 x 145 mm).
  • – Fits: xTool M1 (385 x 300 mm), xTool S1 (498 x 319 mm), xTool P2 / P2S (600 x 308 mm), about 400 x 400 mm open-frame diode lasers (xTool D1 Pro, Atomstack A5 / A10, Sculpfun S30, Ortur LM3, Creality Falcon2), CO2 4040 (400 x 400 mm), CO2 6040 (600 x 400 mm) and larger.
  • – Fits after re-arranging the pieces: Glowforge Basic / Plus / Pro (495 x 279 mm).
  • – Too small: K40 (about 300 x 200 mm), 300 x 300 mm machines.
  • – Do not scale the files: the slots are made for 3 mm wood.
  • LIGHT
  • – E27 LED globe bulb G45 (45 mm), 4-6 W, warm white (E26 in the US). LED only, never a hot bulb.
  • – Also needed: E27 socket no wider than 40 mm, M10 lamp nipple or cord grip, ceiling canopy, textile cord. Not included.
  • – The bulb is changed from below, through the 60 mm opening of the bottom ring.
  • NOTES
  • – The thinnest feather bands of the wings are about 2-3 mm: handle the wings plate with care.
  • – Cut one rib, the bottom ring and the cap first to test the slot fit. If the NOMINAL file is loose, use KERF-COMP.
  • – This is a hanging lamp, not a table lamp.
What is in the download
  • PT80 laser cut files
Licence

Make it as many times as you like for yourself or as gifts. To sell finished pieces, add the commercial licence when you buy. The file itself may never be resold or shared.

Cut it with

Same material, same afternoon.

View all
New3D Star Tree Lantern SVG laser cut file

3D Star Tree Lantern SVG

Layered wood file · ApexLayer3D

Original price was: $8.00.Current price is: $5.60.

From people who cut it

Reviews

There are no reviews yet.

Be the first to review “Christmas Angel Pendant Lamp Laser Cut File”

Your email address will not be published. Required fields are marked *

Why these files cut cleanly

Cut before it is sold

Every file goes on a real machine and gets built by hand before it goes online. If it does not fit together, it does not go up.

Layers numbered on the back

Each part carries its layer number engraved on the reverse, so a stack of forty pieces never turns into a guessing game.

Alignment built in

Two 4 mm pin holes run through every wood layer. Glass patterns come with registration marks that survive printing.

Resized for free

Tell us the finished width you need and we redraw the file to match. No extra charge, usually back the same day.

Questions makers ask

What software do I need to open these?

LightBurn, xTool Creative Space, Glowforge and LaserGRBL all read the SVG straight off. The DXF is there for older machine software, and the AI and CDR files are for anyone who wants to edit the drawing.

My machine bed is smaller than the finished piece. Now what?

Every file also ships with each layer as its own file, so you can cut them one at a time on a small bed. Tell us your bed size and we will nest the parts to fit it.

Can I use wood that is not 3 mm?

Yes for the flat layered pieces — thicker wood just makes a deeper stack. For slot-together builds like the tealight shades the thickness is structural, so ask us and we will adjust the joints.

Do the glass patterns come sized for copper foil or lead came?

Both. Each pattern has two versions: a foil version with hairline cut lines, and a came version with the heart width already allowed for.

Can I sell what I make from these?

Personal use is covered by the free licence. Selling finished pieces needs the commercial licence, which is a few dollars on any file and included in every collection.

What if the file does not work on my machine?

Write to us with the file name and what happened. We fix the file and send it back. We do not reply with a link to a tutorial.