Home / Christmas and Seasonal / Christmas Skating Village Laser Cut File

PetalSmith3D 1,330 files

Christmas Skating Village Laser Cut File

Layered wood file

Be the first to review

Original price was: $8.00.Current price is: $5.60.

Christmas Skating Village Laser Cut File, Moving Roller Skaters on Hand Crank Ring, 3D Wooden Puzzle SVG DXF, LED Church Decor 3mm

Add the commercial licence — $5.00 Sell what you make from this file · What is included
  • Download straight after checkout
  • Test-cut before listing
  • Something wrong? We fix the file, free
Meet the designer
PetalSmith3D 1,330 files on MixiArt
Visit shop Message
Layerednumbered in stacking order
SVG, DXF, AI, PDFone file per layer
Alignment built inpin holes every layer
Numbered partsengraved on the back
Any sizeresized on request, free
Licence includedpersonal use
About this file

“Christmas Skating Village: a 3D laser cut kit for 3 mm plywood. Turn the hand crank and four roller skaters glide round the fountain on a turning ring (3.1 crank turns = one lap). Behind the plaza stand a cottage with a curled roof, a church with a bell tower and rose window and a half-timbered double house, under a cloud arch with stars on two poles; a USB LED on a drawer in the base lights the windows of all three buildings.

THIS IS A DIGITAL FILE. No physical item will be shipped.

  • WHAT YOU GET
  • – Laser cut files in DXF and SVG (plus PNG previews), CUT (red) and ENGRAVE (blue) on separate layers
  • – Two versions: NOMINAL and KERF-COMP 0.15 mm
  • – All sheets in one file, one file per 400 x 300 mm sheet, and every part as its own file (78 parts, NOMINAL size)
  • – Assembly guide PDF in English, German and French
  • – READ ME FIRST page: which version to cut, layers, what to test-cut first
  • – Delivered as 3 zip files: all files preview, per sheet, per part
  • FINISHED SIZE
  • – 380 x 286 mm base, 250 mm tall to the top of the clouds (15.0 x 11.3 x 9.8 in)
  • – 78 pieces, glue-free slot assembly, about 1.47 kg (3.2 lb)
  • MATERIAL
  • – 3 mm plywood. The slots are 3.02 mm: measure your board, boards thicker than 3.05 mm (many 1/8 in boards are 3.175 mm) will be too tight.
  • – 9 sheets of 400 x 300 mm (15.75 x 11.8 in).
  • LASER MACHINE
  • – Working area needed: at least 400 x 300 mm (15.75 x 11.8 in). The largest pieces are the base layers (up to 380 x 286 mm).
  • – Fits: xTool S1 (498 x 319 mm), xTool P2 / P2S (600 x 308 mm), about 400 x 400 mm open-frame diode lasers (xTool D1 Pro, Atomstack A5 / A10, Sculpfun S30, Ortur LM3, Creality Falcon2), CO2 4040 (400 x 400 mm), CO2 6040 (600 x 400 mm) and larger.
  • – Too small: xTool M1 (385 x 300 mm), Glowforge Basic / Plus / Pro (495 x 279 mm), K40 (about 300 x 200 mm), 300 x 300 mm machines.
  • – Do not scale the files: the slots are made for 3 mm wood.
  • LIGHT
  • – USB LED strip, 5 V, warm white, about 10 mm wide and 30 cm long, self-adhesive (not included). It sticks on a drawer that slides into the base from the right side; the light rises into the cottage, the bell tower, the church and the double house and shines out of the cut windows, the rose window and the bell arches. Pull the drawer out to change the strip without taking anything apart. USB only, no mains voltage.
  • NOTES
  • – The gears are cut from the same files. Cut the gear ring and the crank pinion first and turn them by hand on a scrap board to check the mesh with your laser’s kerf.
  • – Cut one skater and check that its two tabs fit the track: the skaters are held by friction only.
  • – Rub candle wax on the floor plate and the gear teeth so the ring turns freely.
  • – Build the cottage before the bell tower. The church and house roof panels rest on their notches by gravity; a drop of glue is optional if the model will be carried around.
What is in the download
  • PT84 laser cut files
Licence

Make it as many times as you like for yourself or as gifts. To sell finished pieces, add the commercial licence when you buy. The file itself may never be resold or shared.

Cut it with

Same material, same afternoon.

View all
New3D Star Tree Lantern SVG laser cut file

3D Star Tree Lantern SVG

Layered wood file · ApexLayer3D

Original price was: $8.00.Current price is: $5.60.

From people who cut it

Reviews

There are no reviews yet.

Be the first to review “Christmas Skating Village Laser Cut File”

Your email address will not be published. Required fields are marked *

Why these files cut cleanly

Cut before it is sold

Every file goes on a real machine and gets built by hand before it goes online. If it does not fit together, it does not go up.

Layers numbered on the back

Each part carries its layer number engraved on the reverse, so a stack of forty pieces never turns into a guessing game.

Alignment built in

Two 4 mm pin holes run through every wood layer. Glass patterns come with registration marks that survive printing.

Resized for free

Tell us the finished width you need and we redraw the file to match. No extra charge, usually back the same day.

Questions makers ask

What software do I need to open these?

LightBurn, xTool Creative Space, Glowforge and LaserGRBL all read the SVG straight off. The DXF is there for older machine software, and the AI and CDR files are for anyone who wants to edit the drawing.

My machine bed is smaller than the finished piece. Now what?

Every file also ships with each layer as its own file, so you can cut them one at a time on a small bed. Tell us your bed size and we will nest the parts to fit it.

Can I use wood that is not 3 mm?

Yes for the flat layered pieces — thicker wood just makes a deeper stack. For slot-together builds like the tealight shades the thickness is structural, so ask us and we will adjust the joints.

Do the glass patterns come sized for copper foil or lead came?

Both. Each pattern has two versions: a foil version with hairline cut lines, and a came version with the heart width already allowed for.

Can I sell what I make from these?

Personal use is covered by the free licence. Selling finished pieces needs the commercial licence, which is a few dollars on any file and included in every collection.

What if the file does not work on my machine?

Write to us with the file name and what happened. We fix the file and send it back. We do not reply with a link to a tutorial.