Home / Christmas and Seasonal / Rose Pendant Lamp Laser Cut File

PetalSmith3D 1,330 files

Rose Pendant Lamp Laser Cut File

Layered wood file

Be the first to review

Original price was: $8.00.Current price is: $5.60.

Rose Pendant Lamp Laser Cut File, 3D Flower Ceiling Light SVG DXF, Layered Wooden Petal Lampshade, Valentine Bedroom Decor, 3mm Plywood

Add the commercial licence — $5.00 Sell what you make from this file · What is included
  • Download straight after checkout
  • Test-cut before listing
  • Something wrong? We fix the file, free
Meet the designer
PetalSmith3D 1,330 files on MixiArt
Visit shop Message
Layerednumbered in stacking order
SVG, DXF, AI, PDFone file per layer
Alignment built inpin holes every layer
Numbered partsengraved on the back
Any sizeresized on request, free
Licence includedpersonal use
About this file

Rose Pendant Lamp: a 3D laser cut ceiling lamp shaped like an open rose, for 3 mm plywood. 40 petals in five rows and 8 serrated green leaves hang on a hidden cage of 16 ribs and 4 rings, around a heart of 8 upright petals and a 4-layer bud. 80 crescent slits along the petal rims glow when the E27 LED bulb inside is on.

THIS IS A DIGITAL FILE. No physical item will be shipped.

  • WHAT YOU GET
  • – Laser cut files in DXF and SVG, CUT (red) and ENGRAVE (blue) on separate layers (the sheet frame has its own layer, do not cut it)
  • – Two versions: NOMINAL and KERF-COMP 0.15 mm
  • – All 13 sheets in one file, and one file per 400 x 300 mm sheet
  • – Every part also as its own file (82 parts, NOMINAL version)
  • – PNG previews of the 13 sheet layouts
  • FINISHED SIZE
  • – 506 mm across the petal tips, 349 mm tall from the lowest leaf tip to the top of the heart petals (19.9 x 19.9 x 13.7 in)
  • – 82 pieces, slotted assembly with no glue needed. About 1.46 kg (3.2 lb) of wood, about 1.6 kg (3.5 lb) with bulb, socket and nipple.
  • MATERIAL
  • – 3 mm plywood. The slots are 3.02 mm: measure your board, boards thicker than 3.05 mm (many 1/8 in boards are 3.175 mm) will be too tight.
  • – 13 sheets of 400 x 300 mm (15.75 x 11.8 in). The last sheet holds only 4 pieces in a 382 x 96 mm strip, so an offcut is enough.
  • LASER MACHINE
  • – Working area needed: at least 390 x 290 mm (15.4 x 11.4 in). The largest piece is ring R2 (256 x 256 mm); the ribs are up to 225 x 152 mm.
  • – Fits: xTool S1 (498 x 319 mm), xTool P2 / P2S (600 x 308 mm), about 400 x 400 mm open-frame diode lasers (xTool D1 Pro, Atomstack A5 / A10, Sculpfun S30, Ortur LM3, Creality Falcon2), CO2 4040 (400 x 400 mm), CO2 6040 (600 x 400 mm) and larger.
  • – Fits after re-arranging the pieces: xTool M1 (385 x 300 mm), Glowforge Basic / Plus / Pro (495 x 279 mm), 300 x 300 mm machines.
  • – Too small: K40 (about 300 x 200 mm).
  • – Do not scale the files: the slots are made for 3 mm wood.
  • LIGHT
  • – E27 LED bulb A60 (60 x 108 mm), up to 8 W, warm white (not included); E26 in the USA and Canada. LED only, never an incandescent or halogen bulb. The bulb glass stays at least 66 mm from the wood.
  • – Change the bulb from below through the 164 mm opening of the bottom ring; nothing is taken apart.
  • HARDWARE (not included)
  • – Pendant cord set: E27 / E26 socket (up to 40 mm diameter and 58 mm long) with M10x1 thread, cord, ceiling canopy and cord grip rated for at least 3 kg
  • – M10x1 hollow lamp nipple about 80 mm long, an M10x1 nut with a 30 mm washer under the hub disc (it carries the lamp) and a top nut (or the cord grip’s own nut)
  • – Have the electrical connection made by a qualified electrician and use a certified cord set (CE in Europe, UL / CSA listed in the USA and Canada). Indoor use in dry rooms only.
  • NOTES
  • – Cut a test first (one rib, a piece of the hub disc and of ring R2, one P4 petal and one heart petal) to check the slot fit with your board.
  • – A helper or a simple stand holds the hub disc and the 4 rings at their heights while the first ribs go in.
  • – In the photos the petals are red, the heart and bud dark red and the leaves green. Painting the ribs and rings dark green hides the frame seen from below.
  • – Every petal sits on two tabs; a drop of glue on each tab helps if the lamp will be moved or dusted often.
What is in the download
  • PT88 laser cut files
Licence

Make it as many times as you like for yourself or as gifts. To sell finished pieces, add the commercial licence when you buy. The file itself may never be resold or shared.

Cut it with

Same material, same afternoon.

View all
New

3D Star Tree Lantern SVG

Layered wood file · ApexLayer3D

Original price was: $8.00.Current price is: $5.60.

From people who cut it

Reviews

There are no reviews yet.

Be the first to review “Rose Pendant Lamp Laser Cut File”

Your email address will not be published. Required fields are marked *

Why these files cut cleanly

Cut before it is sold

Every file goes on a real machine and gets built by hand before it goes online. If it does not fit together, it does not go up.

Layers numbered on the back

Each part carries its layer number engraved on the reverse, so a stack of forty pieces never turns into a guessing game.

Alignment built in

Two 4 mm pin holes run through every wood layer. Glass patterns come with registration marks that survive printing.

Resized for free

Tell us the finished width you need and we redraw the file to match. No extra charge, usually back the same day.

Questions makers ask

What software do I need to open these?

LightBurn, xTool Creative Space, Glowforge and LaserGRBL all read the SVG straight off. The DXF is there for older machine software, and the AI and CDR files are for anyone who wants to edit the drawing.

My machine bed is smaller than the finished piece. Now what?

Every file also ships with each layer as its own file, so you can cut them one at a time on a small bed. Tell us your bed size and we will nest the parts to fit it.

Can I use wood that is not 3 mm?

Yes for the flat layered pieces — thicker wood just makes a deeper stack. For slot-together builds like the tealight shades the thickness is structural, so ask us and we will adjust the joints.

Do the glass patterns come sized for copper foil or lead came?

Both. Each pattern has two versions: a foil version with hairline cut lines, and a came version with the heart width already allowed for.

Can I sell what I make from these?

Personal use is covered by the free licence. Selling finished pieces needs the commercial licence, which is a few dollars on any file and included in every collection.

What if the file does not work on my machine?

Write to us with the file name and what happened. We fix the file and send it back. We do not reply with a link to a tutorial.