Home / Christmas and Seasonal / Santa Claus Lamp Laser Cut File

PetalSmith3D 1,330 files

Santa Claus Lamp Laser Cut File

Layered wood file

Be the first to review

Original price was: $8.00.Current price is: $5.60.

Santa Claus Lamp Laser Cut File, Standing Santa 3D Wooden Puzzle SVG DXF, Christmas Night Light, Xmas Table Decor 3mm to 6mm

Add the commercial licence — $5.00 Sell what you make from this file · What is included
  • Download straight after checkout
  • Test-cut before listing
  • Something wrong? We fix the file, free
Meet the designer
PetalSmith3D 1,330 files on MixiArt
Visit shop Message
Layerednumbered in stacking order
SVG, DXF, AI, PDFone file per layer
Alignment built inpin holes every layer
Numbered partsengraved on the back
Any sizeresized on request, free
Licence includedpersonal use
About this file

Santa Claus Lamp: a 3D laser cut kit of a standing Santa with bent knees, mittens in front of the belly and a hat tail with pompom. Radial ribs and rings form the jacket and hat, so the light shines out between the slats, and the face and beard lines are engraved. The E14 LED bulb sits on a lamp carrier with a twist lock that comes out downward between the legs, so the bulb is changed without taking anything apart.

THIS IS A DIGITAL FILE. No physical item will be shipped.

  • WHAT YOU GET
  • – Laser cut files in DXF and SVG for 7 board thicknesses: 3 mm, 1/8 in (3.175 mm), 0.166 in (4.216 mm), 4 mm, 5 mm, 6 mm and 1/4 in (6.35 mm)
  • – CUT (red) and ENGRAVE (blue, face and beard) on separate layers, sheet border on its own layer (do not cut). Every cut piece is one closed outline with smooth curves.
  • – Two versions for each thickness: NOMINAL and KERF-COMP 0.15 mm
  • – Sheet layout previews (PNG)
  • FINISHED SIZE
  • – 173 mm wide, 181 mm deep, 348 mm tall (6.8 x 7.1 x 13.7 in), the same at every thickness
  • – 52 pieces (51 with 6 mm and 6.35 mm boards: the mustache is part of the beard plate), glue-free slot assembly, about 400 g (0.9 lb) in 3 mm plywood
  • MATERIAL
  • – Plywood from 3 to 6.35 mm, one folder per thickness. The slots are the board thickness + 0.02 mm (3.02 mm in the 3 mm files): measure your board and use the folder that matches. Many 1/8 in boards are 3.175 mm and will be too tight in the 3 mm files.
  • – 4 sheets of 400 x 300 mm (15.75 x 11.8 in), 5 sheets for 3.175 mm boards.
  • LASER MACHINE
  • – Working area needed: at least 390 x 290 mm (15.4 x 11.4 in). The largest piece is 230 x 96 mm.
  • – Fits: xTool S1 (498 x 319 mm), xTool P2 / P2S (600 x 308 mm), about 400 x 400 mm open-frame diode lasers (xTool D1 Pro, Atomstack A5 / A10, Sculpfun S30, Ortur LM3, Creality Falcon2), CO2 4040 (400 x 400 mm), CO2 6040 (600 x 400 mm) and larger.
  • – Fits after re-arranging the pieces: K40 (about 300 x 200 mm), 300 x 300 mm machines, xTool M1 (385 x 300 mm), Glowforge Basic / Plus / Pro (495 x 279 mm).
  • – Do not scale the files: the slots are made for the board thickness of each folder.
  • LIGHT (not included)
  • – E14 LED candle bulb C35 (up to 35 mm diameter, up to 78 mm of glass above the socket), max 4 W, warm white. LED only.
  • – E14 socket up to 36 mm diameter x 40 mm with M10x1 thread (E12 in the USA / Canada), M10 nipple with nut, lamp cord.
  • – To change the bulb: switch off, tilt Santa back, turn the lamp carrier back and pull it about 124 mm down between the legs. Leave about 150 mm of cable slack inside.
  • NOTES
  • – Cut the collar ring and two ribs first and check the slot fit with your board.
  • – The mustache and the mittens each hang on one joint. A drop of glue is optional.
  • – While you slide in the first ribs, hold the rings at their heights with a helper or cardboard spacers.
What is in the download
  • PT58 laser cut files
Licence

Make it as many times as you like for yourself or as gifts. To sell finished pieces, add the commercial licence when you buy. The file itself may never be resold or shared.

Cut it with

Same material, same afternoon.

View all
New

3D Star Tree Lantern SVG

Layered wood file · ApexLayer3D

Original price was: $8.00.Current price is: $5.60.

From people who cut it

Reviews

There are no reviews yet.

Be the first to review “Santa Claus Lamp Laser Cut File”

Your email address will not be published. Required fields are marked *

Why these files cut cleanly

Cut before it is sold

Every file goes on a real machine and gets built by hand before it goes online. If it does not fit together, it does not go up.

Layers numbered on the back

Each part carries its layer number engraved on the reverse, so a stack of forty pieces never turns into a guessing game.

Alignment built in

Two 4 mm pin holes run through every wood layer. Glass patterns come with registration marks that survive printing.

Resized for free

Tell us the finished width you need and we redraw the file to match. No extra charge, usually back the same day.

Questions makers ask

What software do I need to open these?

LightBurn, xTool Creative Space, Glowforge and LaserGRBL all read the SVG straight off. The DXF is there for older machine software, and the AI and CDR files are for anyone who wants to edit the drawing.

My machine bed is smaller than the finished piece. Now what?

Every file also ships with each layer as its own file, so you can cut them one at a time on a small bed. Tell us your bed size and we will nest the parts to fit it.

Can I use wood that is not 3 mm?

Yes for the flat layered pieces — thicker wood just makes a deeper stack. For slot-together builds like the tealight shades the thickness is structural, so ask us and we will adjust the joints.

Do the glass patterns come sized for copper foil or lead came?

Both. Each pattern has two versions: a foil version with hairline cut lines, and a came version with the heart width already allowed for.

Can I sell what I make from these?

Personal use is covered by the free licence. Selling finished pieces needs the commercial licence, which is a few dollars on any file and included in every collection.

What if the file does not work on my machine?

Write to us with the file name and what happened. We fix the file and send it back. We do not reply with a link to a tutorial.