Home / Lamps and Tealights / T-Rex Head Wall Lamp Laser Cut File

PetalSmith3D 1,330 files

T-Rex Head Wall Lamp Laser Cut File

Layered wood file

Be the first to review

Original price was: $8.00.Current price is: $5.60.

T-Rex Head Wall Lamp Laser Cut File, 3D Wooden Dinosaur Head Night Light SVG DXF, LED Tea Light Kids Room Wall Decor, 3mm Plywood

Add the commercial licence — $5.00 Sell what you make from this file · What is included
  • Download straight after checkout
  • Test-cut before listing
  • Something wrong? We fix the file, free
Meet the designer
PetalSmith3D 1,330 files on MixiArt
Visit shop Message
Layerednumbered in stacking order
SVG, DXF, AI, PDFone file per layer
Alignment built inpin holes every layer
Numbered partsengraved on the back
Any sizeresized on request, free
Licence includedpersonal use
About this file

T-Rex Head Wall Lamp: a 3D laser cut kit for 3 mm plywood. Sixteen skull rings on a profile spine and two jaw plates form the head with its open mouth and both rows of teeth. A battery LED tea light behind the eye lights the skull from inside. The head hangs on the wall from two keyholes in the back plate.

THIS IS A DIGITAL FILE. No physical item will be shipped.

  • WHAT YOU GET
  • – Laser cut files in DXF and SVG with smooth spline curves, CUT layer only (no engraving)
  • – Two versions: NOMINAL and KERF-COMP 0.15 mm
  • – A PNG preview of every sheet. The SHEET-FRAME layer is the sheet border: do not cut it.
  • FINISHED SIZE
  • – 163 mm wide, 300 mm from the wall, 252 mm tall (6.4 x 11.8 x 9.9 in)
  • – 23 pieces, glue-free cross-lap assembly, about 260 g (0.6 lb) of wood
  • MATERIAL
  • – 3 mm plywood. The slots are 3.02 mm: measure your board, boards thicker than 3.05 mm (many 1/8 in boards are 3.175 mm) will be too tight.
  • – 5 sheets of 400 x 300 mm (15.75 x 11.8 in).
  • LASER MACHINE
  • – Working area needed: at least 390 x 290 mm (15.4 x 11.4 in). The largest piece is the 300 x 252 mm spine.
  • – Fits: xTool S1 (498 x 319 mm), xTool P2 / P2S (600 x 308 mm), about 400 x 400 mm open-frame diode lasers (xTool D1 Pro, Atomstack A5 / A10, Sculpfun S30, Ortur LM3, Creality Falcon2), CO2 4040 (400 x 400 mm), CO2 6040 (600 x 400 mm) and larger.
  • – Fits after re-arranging the pieces: xTool M1 (385 x 300 mm), Glowforge Basic / Plus / Pro (495 x 279 mm).
  • – Too small: K40 (about 300 x 200 mm), 300 x 300 mm machines.
  • – Do not scale the files: the slots are made for 3 mm wood.
  • LIGHT
  • – Battery LED tea light, 38 mm wide (not included). Never use a real candle.
  • – It stands on a tray behind the eye. To switch it on or change the battery, lift rings 2, 3 and 4 straight up, take the tea light out sideways and drop the rings back. A tea light with remote control or timer saves this step.
  • – The back plate is solid: no light shines onto the wall.
  • HARDWARE
  • – 2 screws with heads up to 8 mm and shanks up to 4 mm, 28 mm apart side by side and level, with wall plugs (not included).
  • NOTES
  • – Cut one ring and a piece of the spine first to check the slot fit with your board.
  • – The lamp tray is held by friction on its brackets: if the NOMINAL file is loose, use KERF-COMP.
What is in the download
  • PT74 laser cut files
Licence

Make it as many times as you like for yourself or as gifts. To sell finished pieces, add the commercial licence when you buy. The file itself may never be resold or shared.

Cut it with

Same material, same afternoon.

View all

From people who cut it

Reviews

There are no reviews yet.

Be the first to review “T-Rex Head Wall Lamp Laser Cut File”

Your email address will not be published. Required fields are marked *

Why these files cut cleanly

Cut before it is sold

Every file goes on a real machine and gets built by hand before it goes online. If it does not fit together, it does not go up.

Layers numbered on the back

Each part carries its layer number engraved on the reverse, so a stack of forty pieces never turns into a guessing game.

Alignment built in

Two 4 mm pin holes run through every wood layer. Glass patterns come with registration marks that survive printing.

Resized for free

Tell us the finished width you need and we redraw the file to match. No extra charge, usually back the same day.

Questions makers ask

What software do I need to open these?

LightBurn, xTool Creative Space, Glowforge and LaserGRBL all read the SVG straight off. The DXF is there for older machine software, and the AI and CDR files are for anyone who wants to edit the drawing.

My machine bed is smaller than the finished piece. Now what?

Every file also ships with each layer as its own file, so you can cut them one at a time on a small bed. Tell us your bed size and we will nest the parts to fit it.

Can I use wood that is not 3 mm?

Yes for the flat layered pieces — thicker wood just makes a deeper stack. For slot-together builds like the tealight shades the thickness is structural, so ask us and we will adjust the joints.

Do the glass patterns come sized for copper foil or lead came?

Both. Each pattern has two versions: a foil version with hairline cut lines, and a came version with the heart width already allowed for.

Can I sell what I make from these?

Personal use is covered by the free licence. Selling finished pieces needs the commercial licence, which is a few dollars on any file and included in every collection.

What if the file does not work on my machine?

Write to us with the file name and what happened. We fix the file and send it back. We do not reply with a link to a tutorial.